Replacement PCBs (with switches) for the frets on a compatible Rock Band guitar.

Includes:

• Includes 2 PCBs with switches installed — 1 for the main fret buttons, one for the smaller “solo” buttons.

• Tactile, mechanical switches which replace the rubber “dome” switches on the original.

• Double-side, plated-thru PCBs are higher quality, thicker and less prone to flexing than the originals .

• Includes snap on spacers to set correct distance from boards to fret buttons (only needed on some guitars).

• Installation is reversible - you can re-install the original PCBs (requires re-soldering the wires).

NOTE: Installation requires disassembling the neck and soldering wires.