Fret Fix

$25.00

Replacement PCBs (with switches) for the frets on a compatible Rock Band guitar.

Includes:

Includes 2 PCBs with switches installed — 1 for the main fret buttons, one for the smaller “solo” buttons.
Tactile, mechanical switches which replace the rubber “dome” switches on the original.
Double-side, plated-thru PCBs are higher quality, thicker and less prone to flexing than the originals .
Includes snap on spacers to set correct distance from boards to fret buttons (only needed on some guitars).
Installation is reversible - you can re-install the original PCBs (requires re-soldering the wires).

NOTE: Installation requires disassembling the neck and soldering wires.

Quantity:

Replacement PCBs (with switches) for the frets on a compatible Rock Band guitar.

Includes:

Includes 2 PCBs with switches installed — 1 for the main fret buttons, one for the smaller “solo” buttons.
Tactile, mechanical switches which replace the rubber “dome” switches on the original.
Double-side, plated-thru PCBs are higher quality, thicker and less prone to flexing than the originals .
Includes snap on spacers to set correct distance from boards to fret buttons (only needed on some guitars).
Installation is reversible - you can re-install the original PCBs (requires re-soldering the wires).

NOTE: Installation requires disassembling the neck and soldering wires.

Compatible Guitars

Most RB1 “Strat” guitars.
RB2, RB3 and RB4 “Strat” guitars.
Rock Band Beatles guitars (Fender, Gretsch, Hofner).
Fender Precision Bass Replica - WIRED version only**

It is NOT compatible with the “Jaguar” or “Riffmaster” guitars. Unfortunately the design of the electronics on those guitars make it difficult to replace the fret buttons.

** While it’s possible to fit the Fret Fix in a WIRELESS Precision Bass it requires extensive modifications and is not recommended. Contact guitar@bytearts.com if you have questions.